这个是安装是报错
INFO[09:49:29 CST] Initializing kubernetes cluster

[master1 172.16.32.2] MSG:
[reset] Reading configuration from the cluster…
[reset] FYI: You can look at this config file with ‘kubectl -n kube-system get cm kubeadm-config -o yaml’
W0709 09:53:33.520036 15426 reset.go:99] [reset] Unable to fetch the kubeadm-config ConfigMap from cluster: failed to get config map: Get “https://lb.kubesphere.local:6444/api/v1/namespaces/kube-system/configmaps/kubeadm-config?timeout=10s”: dial tcp 172.16.32.10:6444: connect: connection refused
[preflight] Running pre-flight checks
W0709 09:53:33.520174 15426 removeetcdmember.go:79] [reset] No kubeadm config, using etcd pod spec to get data directory
[reset] No etcd config found. Assuming external etcd
[reset] Please, manually reset etcd to prevent further issues
[reset] Stopping the kubelet service
[reset] Unmounting mounted directories in “/var/lib/kubelet”
[reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki]
[reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/kubernetes/bootstrap-kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf]
[reset] Deleting contents of stateful directories: [/var/lib/kubelet /var/lib/dockershim /var/run/kubernetes /var/lib/cni]

The reset process does not clean CNI configuration. To do so, you must remove /etc/cni/net.d

The reset process does not reset or clean up iptables rules or IPVS tables.
If you wish to reset iptables, you must do so manually by using the “iptables” command.

If your cluster was setup to utilize IPVS, run ipvsadm –clear (or similar)
to reset your system’s IPVS tables.

The reset process does not clean your kubeconfig files and you must remove them manually.
Please, check the contents of the $HOME/.kube/config file.
[master1 172.16.32.2] MSG:
[reset] Reading configuration from the cluster…
[reset] FYI: You can look at this config file with ‘kubectl -n kube-system get cm kubeadm-config -o yaml’
W0709 09:57:38.305739 17155 reset.go:99] [reset] Unable to fetch the kubeadm-config ConfigMap from cluster: failed to get config map: Get “https://lb.kubesphere.local:6444/api/v1/namespaces/kube-system/configmaps/kubeadm-config?timeout=10s”: dial tcp 172.16.32.10:6444: connect: connection refused
[preflight] Running pre-flight checks
W0709 09:57:38.305887 17155 removeetcdmember.go:79] [reset] No kubeadm config, using etcd pod spec to get data directory
[reset] No etcd config found. Assuming external etcd
[reset] Please, manually reset etcd to prevent further issues
[reset] Stopping the kubelet service
[reset] Unmounting mounted directories in “/var/lib/kubelet”
[reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki]
[reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/kubernetes/bootstrap-kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf]
[reset] Deleting contents of stateful directories: [/var/lib/kubelet /var/lib/dockershim /var/run/kubernetes /var/lib/cni]

The reset process does not clean CNI configuration. To do so, you must remove /etc/cni/net.d

The reset process does not reset or clean up iptables rules or IPVS tables.
If you wish to reset iptables, you must do so manually by using the “iptables” command.

If your cluster was setup to utilize IPVS, run ipvsadm –clear (or similar)
to reset your system’s IPVS tables.

The reset process does not clean your kubeconfig files and you must remove them manually.
Please, check the contents of the $HOME/.kube/config file.
ERRO[10:01:43 CST] Failed to init kubernetes cluster: Failed to exec command: sudo env PATH=$PATH /bin/sh -c “/usr/local/bin/kubeadm init –config=/etc/kubernetes/kubeadm-config.yaml –ignore-preflight-errors=FileExisting-crictl”
W0709 09:57:40.332189 17505 utils.go:69] The recommended value for “clusterDNS” in “KubeletConfiguration” is: [10.233.0.10]; the provided value is: [169.254.25.10]
[init] Using Kubernetes version: v1.20.4
[preflight] Running pre-flight checks
[WARNING IsDockerSystemdCheck]: detected “cgroupfs” as the Docker cgroup driver. The recommended driver is “systemd”. Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using ‘kubeadm config images pull’
[certs] Using certificateDir folder “/etc/kubernetes/pki”
[certs] Generating “ca” certificate and key
[certs] Generating “apiserver” certificate and key
[certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local lb.kubesphere.local localhost master1 master1.cluster.local master2 master2.cluster.local master3 master3.cluster.local node1 node1.cluster.local node2 node2.cluster.local node3 node3.cluster.local] and IPs [10.233.0.1 172.16.32.2 127.0.0.1 172.16.32.10 172.16.32.11 172.16.32.5 172.16.32.16 172.16.32.4 172.16.32.6]
[certs] Generating “apiserver-kubelet-client” certificate and key
[certs] Generating “front-proxy-ca” certificate and key
[certs] Generating “front-proxy-client” certificate and key
[certs] External etcd mode: Skipping etcd/ca certificate authority generation
[certs] External etcd mode: Skipping etcd/server certificate generation
[certs] External etcd mode: Skipping etcd/peer certificate generation
[certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation
[certs] External etcd mode: Skipping apiserver-etcd-client certificate generation
[certs] Generating “sa” key and public key
[kubeconfig] Using kubeconfig folder “/etc/kubernetes”
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing “admin.conf” kubeconfig file
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing “kubelet.conf” kubeconfig file
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing “controller-manager.conf” kubeconfig file
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing “scheduler.conf” kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file “/var/lib/kubelet/kubeadm-flags.env”
[kubelet-start] Writing kubelet configuration to file “/var/lib/kubelet/config.yaml”
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder “/etc/kubernetes/manifests”
[control-plane] Creating static Pod manifest for “kube-apiserver”
[control-plane] Creating static Pod manifest for “kube-controller-manager”
[control-plane] Creating static Pod manifest for “kube-scheduler”
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory “/etc/kubernetes/manifests”. This can take up to 4m0s
[kubelet-check] Initial timeout of 40s passed.

Unfortunately, an error has occurred:
	timed out waiting for the condition

This error is likely caused by:
	- The kubelet is not running
	- The kubelet is unhealthy due to a misconfiguration of the node in some way (required cgroups disabled)

If you are on a systemd-powered system, you can try to troubleshoot the error with the following commands:
	- 'systemctl status kubelet'
	- 'journalctl -xeu kubelet'

Additionally, a control plane component may have crashed or exited when started by the container runtime.
To troubleshoot, list all containers using your preferred container runtimes CLI.

Here is one example how you may list all Kubernetes containers running in docker:
	- 'docker ps -a | grep kube | grep -v pause'
	Once you have found the failing container, you can inspect its logs with:
	- 'docker logs CONTAINERID'

error execution phase wait-control-plane: couldn’t initialize a Kubernetes cluster
To see the stack trace of this error execute with –v=5 or higher: Process exited with status 1 node=172.16.32.2
WARN[10:01:43 CST] Task failed …
WARN[10:01:43 CST] error: interrupted by error
Error: Failed to init kubernetes cluster: interrupted by error
Usage:
kk create cluster [flags]

Flags:
–download-cmd string The user defined command to download the necessary binary files. The first param ‘%s’ is output path, the second param ‘%s’, is the URL (default “curl -L -o %s %s”)
-f, –filename string Path to a configuration file
-h, –help help for cluster
–skip-pull-images Skip pre pull images
–with-kubernetes string Specify a supported version of kubernetes (default “v1.19.8”)
–with-kubesphere Deploy a specific version of kubesphere (default v3.1.0)
–with-local-storage Deploy a local PV provisioner
-y, –yes Skip pre-check of the installation

Global Flags:
–debug Print detailed information (default true)
–in-cluster Running inside the cluster

Failed to init kubernetes cluster: interrupted by error

但检查是第二个主节点上的docker都没来，不清楚什么原因？

这是我的配置