CauchyK零SK壹S
我看报错找不到这个镜像，机器磁盘空间是不是比较小，导致镜像没有完全导入呢？可以检查下，然后删除scripts/os中的*.tmp文件重试。
离线安装 KubeSphere 2.1.1 与 Kubernetes
Sseal82K零S
- 已编辑
安装失败，这几个环境包安装不上
本地apt_repo里，这几个软件都存在
当手动挨个尝试的时候发现
python3-software-properties依赖python3-pycurl，而在pip_repo文件夹中也是有python3-pycurl这个包的
这就说明这个
python3-pycurl并没有被正确安装啊，而且，这个是python3的依赖包，但是安装程序里好像根本没有安装pip3，只有pip27
- CauchyK零SK壹S
- 已编辑
seal82
系统应该不是官方纯净版新安装的吧，这个看起来是依赖冲突问题，apt的依赖问题可以用aptitude尝试排查处理
https://blog.csdn.net/Davidietop/article/details/88934783
Sseal82K零S
Cauchy 我是纯净的ubuntu，没有装任何东西
- 不知道为什么发不了图片了，我文字描述一下吧
- 错误显示是
software-properties-common需要依赖python3-software-properties，而在/kubeinstaller/apt_repo/16.04.6/iso中是有python3-software-properties的，于是我尝试手动dpkg -i安装这个包，结果报错说需要依赖python3-pycurl这个包，于是我又到/kubeinstaller/pip_repo/pip27/iso路径下，找到了pycurl-7.19.0.tar.gz这个包，当我手动sudo tar解压的却提示我这个tar包里面的文件都是只读文件，不能解压。这就产生了两个问题 - 1.这是个python3的依赖包，但是
/kubeinstaller/pip_repo/路径下只有pip27文件夹，却没有pip3的文件夹，说明没有pip3的本地资源库 - 2.就算内部机制让python3的本地资源库可以共用pip27文件夹，但是
pycurl-7.19.0.tar.gz这个压缩包确是个完全只读文件，根本打不开
FeynmanK零SK贰SK壹S
大家如果使用离线 Installer 安装不顺利，建议先自己安装好 k8s，然后参考 在 K8s 离线安装 KubeSphere，这样会很方便，也可以避免 OS 缺少依赖包的问题。
6 天 后
- 已编辑
centos 7.5 三节点安装，报错如下
TASK [prepare/nodes : GlusterFS | Installing glusterfs-client (YUM)] ********************************************************************************************************************************
Tuesday 14 April 2020 19:30:35 +0800 (0:00:00.429) 0:00:47.080 *********
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (5 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (5 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (5 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (4 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (4 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (4 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (3 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (3 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (3 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (2 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (2 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (2 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (1 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (1 retries left).
FAILED - RETRYING: GlusterFS | Installing glusterfs-client (YUM) (1 retries left).
fatal: [node2]: FAILED! => {
"attempts": 5,
"changed": false,
"rc": 1,
"results": [
"Loaded plugins: langpacks\nResolving Dependencies\n--> Running transaction check\n---> Package glusterfs-fuse.x86_64 0:3.12.2-47.2.el7 will be installed\n--> Processing Dependency: glusterfs-libs(x86-64) = 3.12.2-47.2.el7 for package: glusterfs-fuse-3.12.2-47.2.el7.x86_64\n--> Processing Dependency: glusterfs-client-xlators(x86-64) = 3.12.2-47.2.el7 for package: glusterfs-fuse-3.12.2-47.2.el7.x86_64\n--> Processing Dependency: glusterfs(x86-64) = 3.12.2-47.2.el7 for package: glusterfs-fuse-3.12.2-47.2.el7.x86_64\n--> Running transaction check\n---> Package glusterfs.x86_64 0:3.8.4-53.el7.centos will be updated\n--> Processing Dependency: glusterfs(x86-64) = 3.8.4-53.el7.centos for package: glusterfs-api-3.8.4-53.el7.centos.x86_64\n---> Package glusterfs.x86_64 0:3.12.2-47.2.el7 will be an update\n---> Package glusterfs-client-xlators.x86_64 0:3.8.4-53.el7.centos will be updated\n--> Processing Dependency: glusterfs-client-xlators(x86-64) = 3.8.4-53.el7.centos for package: glusterfs-api-3.8.4-53.el7.centos.x86_64\n---> Package glusterfs-client-xlators.x86_64 0:3.12.2-47.2.el7 will be an update\n---> Package glusterfs-libs.x86_64 0:3.8.4-53.el7.centos will be updated\n--> Processing Dependency: glusterfs-libs(x86-64) = 3.8.4-53.el7.centos for package: glusterfs-cli-3.8.4-53.el7.centos.x86_64\n---> Package glusterfs-libs.x86_64 0:3.12.2-47.2.el7 will be an update\n--> Finished Dependency Resolution\n You could try using --skip-broken to work around the problem\n You could try running: rpm -Va --nofiles --nodigest\n"
]
}
MSG:
Error: Package: glusterfs-api-3.8.4-53.el7.centos.x86_64 (@anaconda)
Requires: glusterfs(x86-64) = 3.8.4-53.el7.centos
Removing: glusterfs-3.8.4-53.el7.centos.x86_64 (@anaconda)
glusterfs(x86-64) = 3.8.4-53.el7.centos
Updated By: glusterfs-3.12.2-47.2.el7.x86_64 (bash)
glusterfs(x86-64) = 3.12.2-47.2.el7
Error: Package: glusterfs-cli-3.8.4-53.el7.centos.x86_64 (@anaconda)
Requires: glusterfs-libs(x86-64) = 3.8.4-53.el7.centos
Removing: glusterfs-libs-3.8.4-53.el7.centos.x86_64 (@anaconda)
glusterfs-libs(x86-64) = 3.8.4-53.el7.centos
Updated By: glusterfs-libs-3.12.2-47.2.el7.x86_64 (bash)
glusterfs-libs(x86-64) = 3.12.2-47.2.el7
Error: Package: glusterfs-api-3.8.4-53.el7.centos.x86_64 (@anaconda)
Requires: glusterfs-client-xlators(x86-64) = 3.8.4-53.el7.centos
Removing: glusterfs-client-xlators-3.8.4-53.el7.centos.x86_64 (@anaconda)
glusterfs-client-xlators(x86-64) = 3.8.4-53.el7.centos
Updated By: glusterfs-client-xlators-3.12.2-47.2.el7.x86_64 (bash)
glusterfs-client-xlators(x86-64) = 3.12.2-47.2.el7
fatal: [node1]: FAILED! => {
"attempts": 5,
"changed": false,
"rc": 1,
"results": [
"Loaded plugins: langpacks\nResolving Dependencies\n--> Running transaction check\n---> Package glusterfs-fuse.x86_64 0:3.12.2-47.2.el7 will be installed\n--> Processing Dependency: glusterfs-libs(x86-64) = 3.12.2-47.2.el7 for package: glusterfs-fuse-3.12.2-47.2.el7.x86_64\n--> Processing Dependency: glusterfs-client-xlators(x86-64) = 3.12.2-47.2.el7 for package: glusterfs-fuse-3.12.2-47.2.el7.x86_64\n--> Processing Dependency: glusterfs(x86-64) = 3.12.2-47.2.el7 for package: glusterfs-fuse-3.12.2-47.2.el7.x86_64\n--> Running transaction check\n---> Package glusterfs.x86_64 0:3.8.4-53.el7.centos will be updated\n--> Processing Dependency: glusterfs(x86-64) = 3.8.4-53.el7.centos for package: glusterfs-api-3.8.4-53.el7.centos.x86_64\n---> Package glusterfs.x86_64 0:3.12.2-47.2.el7 will be an update\n---> Package glusterfs-client-xlators.x86_64 0:3.8.4-53.el7.centos will be updated\n--> Processing Dependency: glusterfs-client-xlators(x86-64) = 3.8.4-53.el7.centos for package: glusterfs-api-3.8.4-53.el7.centos.x86_64\n---> Package glusterfs-client-xlators.x86_64 0:3.12.2-47.2.el7 will be an update\n---> Package glusterfs-libs.x86_64 0:3.8.4-53.el7.centos will be updated\n--> Processing Dependency: glusterfs-libs(x86-64) = 3.8.4-53.el7.centos for package: glusterfs-cli-3.8.4-53.el7.centos.x86_64\n---> Package glusterfs-libs.x86_64 0:3.12.2-47.2.el7 will be an update\n--> Finished Dependency Resolution\n You could try using --skip-broken to work around the problem\n You could try running: rpm -Va --nofiles --nodigest\n"
]
}
MSG:
Error: Package: glusterfs-api-3.8.4-53.el7.centos.x86_64 (@anaconda)
Requires: glusterfs(x86-64) = 3.8.4-53.el7.centos
Removing: glusterfs-3.8.4-53.el7.centos.x86_64 (@anaconda)
glusterfs(x86-64) = 3.8.4-53.el7.centos
Updated By: glusterfs-3.12.2-47.2.el7.x86_64 (bash)
glusterfs(x86-64) = 3.12.2-47.2.el7
Error: Package: glusterfs-cli-3.8.4-53.el7.centos.x86_64 (@anaconda)
Requires: glusterfs-libs(x86-64) = 3.8.4-53.el7.centos
Removing: glusterfs-libs-3.8.4-53.el7.centos.x86_64 (@anaconda)
glusterfs-libs(x86-64) = 3.8.4-53.el7.centos
Updated By: glusterfs-libs-3.12.2-47.2.el7.x86_64 (bash)
glusterfs-libs(x86-64) = 3.12.2-47.2.el7
Error: Package: glusterfs-api-3.8.4-53.el7.centos.x86_64 (@anaconda)
Requires: glusterfs-client-xlators(x86-64) = 3.8.4-53.el7.centos
Removing: glusterfs-client-xlators-3.8.4-53.el7.centos.x86_64 (@anaconda)
glusterfs-client-xlators(x86-64) = 3.8.4-53.el7.centos
Updated By: glusterfs-client-xlators-3.12.2-47.2.el7.x86_64 (bash)
glusterfs-client-xlators(x86-64) = 3.12.2-47.2.el7
fatal: [master]: FAILED! => {
"attempts": 5,
"changed": false,
"rc": 1,
"results": [
"Loaded plugins: langpacks\nResolving Dependencies\n--> Running transaction check\n---> Package glusterfs-fuse.x86_64 0:3.12.2-47.2.el7 will be installed\n--> Processing Dependency: glusterfs-libs(x86-64) = 3.12.2-47.2.el7 for package: glusterfs-fuse-3.12.2-47.2.el7.x86_64\n--> Processing Dependency: glusterfs-client-xlators(x86-64) = 3.12.2-47.2.el7 for package: glusterfs-fuse-3.12.2-47.2.el7.x86_64\n--> Processing Dependency: glusterfs(x86-64) = 3.12.2-47.2.el7 for package: glusterfs-fuse-3.12.2-47.2.el7.x86_64\n--> Running transaction check\n---> Package glusterfs.x86_64 0:3.8.4-53.el7.centos will be updated\n--> Processing Dependency: glusterfs(x86-64) = 3.8.4-53.el7.centos for package: glusterfs-api-3.8.4-53.el7.centos.x86_64\n---> Package glusterfs.x86_64 0:3.12.2-47.2.el7 will be an update\n---> Package glusterfs-client-xlators.x86_64 0:3.8.4-53.el7.centos will be updated\n--> Processing Dependency: glusterfs-client-xlators(x86-64) = 3.8.4-53.el7.centos for package: glusterfs-api-3.8.4-53.el7.centos.x86_64\n---> Package glusterfs-client-xlators.x86_64 0:3.12.2-47.2.el7 will be an update\n---> Package glusterfs-libs.x86_64 0:3.8.4-53.el7.centos will be updated\n--> Processing Dependency: glusterfs-libs(x86-64) = 3.8.4-53.el7.centos for package: glusterfs-cli-3.8.4-53.el7.centos.x86_64\n---> Package glusterfs-libs.x86_64 0:3.12.2-47.2.el7 will be an update\n--> Finished Dependency Resolution\n You could try using --skip-broken to work around the problem\n** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:\npython-requests-2.6.0-7.el7_7.noarch has missing requires of python-urllib3 >= ('0', '1.10.2', '1')\n"
]
}
MSG:
Error: Package: glusterfs-api-3.8.4-53.el7.centos.x86_64 (@anaconda)
Requires: glusterfs(x86-64) = 3.8.4-53.el7.centos
Removing: glusterfs-3.8.4-53.el7.centos.x86_64 (@anaconda)
glusterfs(x86-64) = 3.8.4-53.el7.centos
Updated By: glusterfs-3.12.2-47.2.el7.x86_64 (bash)
glusterfs(x86-64) = 3.12.2-47.2.el7
Error: Package: glusterfs-cli-3.8.4-53.el7.centos.x86_64 (@anaconda)
Requires: glusterfs-libs(x86-64) = 3.8.4-53.el7.centos
Removing: glusterfs-libs-3.8.4-53.el7.centos.x86_64 (@anaconda)
glusterfs-libs(x86-64) = 3.8.4-53.el7.centos
Updated By: glusterfs-libs-3.12.2-47.2.el7.x86_64 (bash)
glusterfs-libs(x86-64) = 3.12.2-47.2.el7
Error: Package: glusterfs-api-3.8.4-53.el7.centos.x86_64 (@anaconda)
Requires: glusterfs-client-xlators(x86-64) = 3.8.4-53.el7.centos
Removing: glusterfs-client-xlators-3.8.4-53.el7.centos.x86_64 (@anaconda)
glusterfs-client-xlators(x86-64) = 3.8.4-53.el7.centos
Updated By: glusterfs-client-xlators-3.12.2-47.2.el7.x86_64 (bash)
glusterfs-client-xlators(x86-64) = 3.12.2-47.2.el7
PLAY RECAP ******************************************************************************************************************************************************************************************
master : ok=8 changed=4 unreachable=0 failed=1
node1 : ok=9 changed=7 unreachable=0 failed=1
node2 : ok=9 changed=7 unreachable=0 failed=1
Tuesday 14 April 2020 19:32:30 +0800 (0:01:54.751) 0:02:41.831 *********
===============================================================================
prepare/nodes : GlusterFS | Installing glusterfs-client (YUM) ------------------------------------------------------------------------------------------------------------------------------ 114.75s
prepare/nodes : Ceph RBD | Installing ceph-common (YUM) ------------------------------------------------------------------------------------------------------------------------------------- 22.55s
prepare/nodes : KubeSphere| Installing JQ (YUM) ---------------------------------------------------------------------------------------------------------------------------------------------- 6.85s
prepare/nodes : Copy admin kubeconfig to root user home -------------------------------------------------------------------------------------------------------------------------------------- 2.89s
download : Download items -------------------------------------------------------------------------------------------------------------------------------------------------------------------- 2.38s
download : Sync container -------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1.95s
prepare/nodes : Install kubectl bash completion ---------------------------------------------------------------------------------------------------------------------------------------------- 1.54s
prepare/nodes : Create kube config dir ------------------------------------------------------------------------------------------------------------------------------------------------------- 1.43s
prepare/nodes : Set kubectl bash completion file --------------------------------------------------------------------------------------------------------------------------------------------- 1.21s
fetch config --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1.08s
modify resolv.conf --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1.01s
prepare/nodes : Fetch /etc/os-release -------------------------------------------------------------------------------------------------------------------------------------------------------- 0.71s
Get the tag date ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 0.59s
modify resolv.conf --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 0.44s
prepare/nodes : Ceph RBD | Installing ceph-common (APT) -------------------------------------------------------------------------------------------------------------------------------------- 0.43s
download : include_tasks --------------------------------------------------------------------------------------------------------------------------------------------------------------------- 0.43s
prepare/nodes : GlusterFS | Installing glusterfs-client (APT) -------------------------------------------------------------------------------------------------------------------------------- 0.43s
prepare/nodes : KubeSphere | Installing JQ (APT) --------------------------------------------------------------------------------------------------------------------------------------------- 0.34s
kubesphere-defaults : Configure defaults ----------------------------------------------------------------------------------------------------------------------------------------------------- 0.28s
set dev version ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 0.27s
failed!
**********************************
please refer to https://kubesphere.io/docs/v2.1/zh-CN/faq/faq-install/
**********************************Kks-5937K零S
kubesphere-all-offline-v2.1.1.tar.gz 离线包 看来少了 flannel 的镜像哦, 只能默认 calico ？
或者有补救方法吗？ flannel 需要哪些镜像，手动补回去。
2020-04-18 13:09:24,698 p=16068 u=xxxxxx | TASK [download : download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 )] *******************************************************************
2020-04-18 13:09:24,698 p=16068 u=xxxxxx | Saturday 18 April 2020 13:09:24 +0800 (0:00:00.115) 0:01:46.334 ********
2020-04-18 13:09:24,909 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (4 retries left).
2020-04-18 13:09:24,978 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (4 retries left).
2020-04-18 13:09:25,020 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (4 retries left).
2020-04-18 13:09:31,195 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (3 retries left).
2020-04-18 13:09:32,151 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (3 retries left).
2020-04-18 13:09:33,086 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (3 retries left).
2020-04-18 13:09:37,372 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (2 retries left).
2020-04-18 13:09:39,327 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (2 retries left).
2020-04-18 13:09:41,250 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (2 retries left).
2020-04-18 13:09:43,558 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (1 retries left).
2020-04-18 13:09:46,493 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (1 retries left).
2020-04-18 13:09:49,409 p=16068 u=xxxxxx | FAILED - RETRYING: download_container | Download image if required ( 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 ) (1 retries left).
2020-04-18 13:09:49,759 p=16068 u=xxxxxx | fatal: [k8s-m-202 -> k8s-m-202]: FAILED! => {
“attempts”: 4,
“changed”: true,
“cmd”: [
“/usr/bin/docker”,
“pull”,
“192.168.1.202:5000/coreos/flannel-cni:v0.3.0”
],
“delta”: “0:00:00.052470″,
“end”: “2020-04-18 13:09:49.745324″,
“rc”: 1,
“start”: “2020-04-18 13:09:49.692854”
}
STDERR:
Error response from daemon: manifest for 192.168.1.202:5000/coreos/flannel-cni:v0.3.0 not found
MSG:
non-zero return code
安装以后 日志没有出现成功的那个界面， 日志内容如下，不能访问服务，请问是什么原因，卸载后重装也是这样
`2020-04-23T03:29:05Z INFO : shell-operator v1.0.0-beta.5
2020-04-23T03:29:05Z INFO : HTTP SERVER Listening on 0.0.0.0:9115
2020-04-23T03:29:05Z INFO : Use temporary dir: /tmp/shell-operator
2020-04-23T03:29:05Z INFO : Initialize hooks manager …
2020-04-23T03:29:05Z INFO : Search and load hooks …
2020-04-23T03:29:05Z INFO : Load hook config from ‘/hooks/kubesphere/installRunner.py’
2020-04-23T03:29:06Z INFO : Initializing schedule manager …
2020-04-23T03:29:06Z INFO : KUBE Init Kubernetes client
2020-04-23T03:29:06Z INFO : KUBE-INIT Kubernetes client is configured successfully
2020-04-23T03:29:06Z INFO : MAIN: run main loop
2020-04-23T03:29:06Z INFO : MAIN: add onStartup tasks
2020-04-23T03:29:06Z INFO : Running schedule manager …
2020-04-23T03:29:06Z INFO : QUEUE add all HookRun@OnStartup
2020-04-23T03:29:06Z INFO : MSTOR Create new metric shell_operator_live_ticks
2020-04-23T03:29:06Z INFO : MSTOR Create new metric shell_operator_tasks_queue_length
2020-04-23T03:29:06Z INFO : GVR for kind ‘ConfigMap’ is /v1, Resource=configmaps
2020-04-23T03:29:06Z INFO : EVENT Kube event ‘2d28f5bb-f5a5-4134-b784-46f90a4011d1′
2020-04-23T03:29:06Z INFO : QUEUE add TASK_HOOK_RUN@KUBE_EVENTS kubesphere/installRunner.py
2020-04-23T03:29:09Z INFO : TASK_RUN HookRun@KUBE_EVENTS kubesphere/installRunner.py
2020-04-23T03:29:09Z INFO : Running hook ‘kubesphere/installRunner.py’ binding ‘KUBE_EVENTS’ …
[WARNING]: No inventory was parsed, only implicit localhost is available
[WARNING]: provided hosts list is empty, only localhost is available. Note that
the implicit localhost does not match ‘all’
PLAY [localhost] ***************************************************************
TASK [download : include_tasks] ************************************************
skipping: [localhost]
TASK [download : Download items] ***********************************************
skipping: [localhost]
TASK [download : Sync container] ***********************************************
skipping: [localhost]
TASK [kubesphere-defaults : Configure defaults] ********************************
ok: [localhost] => {
“msg”: “Check roles/kubesphere-defaults/defaults/main.yml”
}
TASK [preinstall : check k8s version] ******************************************
changed: [localhost]
TASK [preinstall : init k8s version] *******************************************
ok: [localhost]
TASK [preinstall : Stop if kuernetes version is nonsupport] ********************
ok: [localhost] => {
“changed”: false,
“msg”: “All assertions passed”
}
TASK [preinstall : check helm status] ******************************************
changed: [localhost]
TASK [preinstall : Stop if Helm is not available] ******************************
ok: [localhost] => {
“changed”: false,
“msg”: “All assertions passed”
}
TASK [preinstall : check storage class] ****************************************
changed: [localhost]
TASK [preinstall : Stop if StorageClass was not found] *************************
ok: [localhost] => {
“changed”: false,
“msg”: “All assertions passed”
}
TASK [preinstall : check default storage class] ********************************
changed: [localhost]
TASK [preinstall : Stop if defaultStorageClass was not found] ******************
skipping: [localhost]
PLAY RECAP *********************************************************************
localhost : ok=9 changed=4 unreachable=0 failed=0 skipped=4 rescued=0 ignored=0
[WARNING]: No inventory was parsed, only implicit localhost is available
[WARNING]: provided hosts list is empty, only localhost is available. Note that
the implicit localhost does not match ‘all’
PLAY [localhost] ***************************************************************
TASK [download : include_tasks] ************************************************
skipping: [localhost]
TASK [download : Download items] ***********************************************
skipping: [localhost]
TASK [download : Sync container] ***********************************************
skipping: [localhost]
TASK [kubesphere-defaults : Configure defaults] ********************************
ok: [localhost] => {
“msg”: “Check roles/kubesphere-defaults/defaults/main.yml”
}
TASK [metrics-server : Metrics-Server | Checking old installation files] *******
ok: [localhost]
TASK [metrics-server : Metrics-Server | deleting old prometheus-operator] ******
skipping: [localhost]
TASK [metrics-server : Metrics-Server | deleting old metrics-server files] *****
[DEPRECATION WARNING]: evaluating {‘failed’: False, u’stat’: {u’exists’:
False}, u’changed’: False} as a bare variable, this behaviour will go away and
you might need to add |bool to the expression in the future. Also see
CONDITIONAL_BARE_VARS configuration toggle.. This feature will be removed in
version 2.12. Deprecation warnings can be disabled by setting
deprecation_warnings=False in ansible.cfg.
ok: [localhost] => (item=metrics-server)
TASK [metrics-server : Metrics-Server | Getting metrics-server installation files] ***
changed: [localhost]
TASK [metrics-server : Metrics-Server | Creating manifests] ********************
changed: [localhost] => (item={u’type’: u’config’, u’name’: u’values’, u’file’: u’values.yaml’})
TASK [metrics-server : Metrics-Server | Check Metrics-Server] ******************
changed: [localhost]
TASK [metrics-server : Metrics-Server | Installing metrics-server] *************
changed: [localhost]
TASK [metrics-server : Metrics-Server | Installing metrics-server retry] *******
skipping: [localhost]
TASK [metrics-server : Metrics-Server | Waitting for v1beta1.metrics.k8s.io ready] ***
FAILED - RETRYING: Metrics-Server | Waitting for v1beta1.metrics.k8s.io ready (60 retries left).
changed: [localhost]
PLAY RECAP *********************************************************************
localhost : ok=8 changed=5 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0
[WARNING]: No inventory was parsed, only implicit localhost is available
[WARNING]: provided hosts list is empty, only localhost is available. Note that
the implicit localhost does not match ‘all’
PLAY [localhost] ***************************************************************
TASK [download : include_tasks] ************************************************
skipping: [localhost]
TASK [download : Download items] ***********************************************
skipping: [localhost]
TASK [download : Sync container] ***********************************************
skipping: [localhost]
TASK [kubesphere-defaults : Configure defaults] ********************************
ok: [localhost] => {
“msg”: “Check roles/kubesphere-defaults/defaults/main.yml”
}
TASK [common : Kubesphere | Check kube-node-lease namespace] *******************
changed: [localhost]
TASK [common : KubeSphere | Get system namespaces] *****************************
ok: [localhost]
TASK [common : set_fact] *******************************************************
ok: [localhost]
TASK [common : debug] **********************************************************
ok: [localhost] => {
“msg”: [
“kubesphere-system”,
“kubesphere-controls-system”,
“kubesphere-monitoring-system”,
“kube-node-lease”,
“kubesphere-logging-system”,
“openpitrix-system”,
“kubesphere-devops-system”,
“istio-system”,
“kubesphere-alerting-system”,
“istio-system”
]
}
TASK [common : KubeSphere | Create kubesphere namespace] ***********************
changed: [localhost] => (item=kubesphere-system)
changed: [localhost] => (item=kubesphere-controls-system)
changed: [localhost] => (item=kubesphere-monitoring-system)
changed: [localhost] => (item=kube-node-lease)
changed: [localhost] => (item=kubesphere-logging-system)
changed: [localhost] => (item=openpitrix-system)
changed: [localhost] => (item=kubesphere-devops-system)
changed: [localhost] => (item=istio-system)
changed: [localhost] => (item=kubesphere-alerting-system)
changed: [localhost] => (item=istio-system)
changed: [localhost] => (item=istio-system)
TASK [common : KubeSphere | Labeling system-workspace] *************************
changed: [localhost] => (item=default)
changed: [localhost] => (item=kube-public)
changed: [localhost] => (item=kube-system)
changed: [localhost] => (item=kubesphere-system)
changed: [localhost] => (item=kubesphere-controls-system)
changed: [localhost] => (item=kubesphere-monitoring-system)
changed: [localhost] => (item=kube-node-lease)
changed: [localhost] => (item=kubesphere-logging-system)
changed: [localhost] => (item=openpitrix-system)
changed: [localhost] => (item=kubesphere-devops-system)
changed: [localhost] => (item=istio-system)
changed: [localhost] => (item=kubesphere-alerting-system)
changed: [localhost] => (item=istio-system)
changed: [localhost] => (item=istio-system)
TASK [common : KubeSphere | Create ImagePullSecrets] ***************************
changed: [localhost] => (item=default)
changed: [localhost] => (item=kube-public)
changed: [localhost] => (item=kube-system)
changed: [localhost] => (item=kubesphere-system)
changed: [localhost] => (item=kubesphere-controls-system)
changed: [localhost] => (item=kubesphere-monitoring-system)
changed: [localhost] => (item=kube-node-lease)
changed: [localhost] => (item=kubesphere-logging-system)
changed: [localhost] => (item=openpitrix-system)
changed: [localhost] => (item=kubesphere-devops-system)
changed: [localhost] => (item=istio-system)
changed: [localhost] => (item=kubesphere-alerting-system)
changed: [localhost] => (item=istio-system)
TASK [common : KubeSphere | Getting kubernetes master num] *********************
changed: [localhost]
TASK [common : KubeSphere | Setting master num] ********************************
ok: [localhost]
TASK [common : Kubesphere | Getting common component installation files] *******
changed: [localhost] => (item=common)
changed: [localhost] => (item=ks-crds)
TASK [common : KubeSphere | Create KubeSphere crds] ****************************
changed: [localhost]
TASK [common : Kubesphere | Checking openpitrix common component] **************
changed: [localhost]
TASK [common : include_tasks] **************************************************
skipping: [localhost] => (item={u’ks’: u’mysql-pvc’, u’op’: u’openpitrix-db’})
skipping: [localhost] => (item={u’ks’: u’etcd-pvc’, u’op’: u’openpitrix-etcd’})
TASK [common : Getting PersistentVolumeName (mysql)] ***************************
skipping: [localhost]
TASK [common : Getting PersistentVolumeSize (mysql)] ***************************
skipping: [localhost]
TASK [common : Setting PersistentVolumeName (mysql)] ***************************
skipping: [localhost]
TASK [common : Setting PersistentVolumeSize (mysql)] ***************************
skipping: [localhost]
TASK [common : Getting PersistentVolumeName (etcd)] ****************************
skipping: [localhost]
TASK [common : Getting PersistentVolumeSize (etcd)] ****************************
skipping: [localhost]
TASK [common : Setting PersistentVolumeName (etcd)] ****************************
skipping: [localhost]
TASK [common : Setting PersistentVolumeSize (etcd)] ****************************
skipping: [localhost]
TASK [common : Kubesphere | Check mysql PersistentVolumeClaim] *****************
fatal: [localhost]: FAILED! => {“changed”: true, “cmd”: “/usr/local/bin/kubectl get pvc -n kubesphere-system mysql-pvc -o jsonpath=‘{.status.capacity.storage}’\n”, “delta”: “0:00:00.525579”, “end”: “2020-04-23 03:30:10.804687”, “msg”: “non-zero return code”, “rc”: 1, “start”: “2020-04-23 03:30:10.279108″, “stderr”: "Error from server (NotFound): persistentvolumeclaims \“mysql-pvc\” not found", “stderr_lines”: ["Error from server (NotFound): persistentvolumeclaims \“mysql-pvc\” not found"], “stdout”: "", “stdout_lines”: []}
…ignoring
TASK [common : Kubesphere | Setting mysql db pv size] **************************
skipping: [localhost]
TASK [common : Kubesphere | Check redis PersistentVolumeClaim] *****************
fatal: [localhost]: FAILED! => {“changed”: true, “cmd”: “/usr/local/bin/kubectl get pvc -n kubesphere-system redis-pvc -o jsonpath=‘{.status.capacity.storage}’\n”, “delta”: “0:00:00.517019″, “end”: “2020-04-23 03:30:11.472357”, “msg”: “non-zero return code”, “rc”: 1, “start”: “2020-04-23 03:30:10.955338”, “stderr”: "Error from server (NotFound): persistentvolumeclaims \“redis-pvc\” not found", “stderr_lines”: ["Error from server (NotFound): persistentvolumeclaims \“redis-pvc\” not found"], “stdout”: "", “stdout_lines”: []}
…ignoring
TASK [common : Kubesphere | Setting redis db pv size] **************************
skipping: [localhost]
TASK [common : Kubesphere | Check minio PersistentVolumeClaim] *****************
fatal: [localhost]: FAILED! => {“changed”: true, “cmd”: “/usr/local/bin/kubectl get pvc -n kubesphere-system minio -o jsonpath=‘{.status.capacity.storage}’\n”, “delta”: “0:00:00.523614″, “end”: “2020-04-23 03:30:12.126804”, “msg”: “non-zero return code”, “rc”: 1, “start”: “2020-04-23 03:30:11.603190″, “stderr”: "Error from server (NotFound): persistentvolumeclaims \“minio\” not found", “stderr_lines”: ["Error from server (NotFound): persistentvolumeclaims \“minio\” not found"], “stdout”: "", “stdout_lines”: []}
…ignoring
TASK [common : Kubesphere | Setting minio pv size] *****************************
skipping: [localhost]
TASK [common : Kubesphere | Check openldap PersistentVolumeClaim] **************
fatal: [localhost]: FAILED! => {“changed”: true, “cmd”: “/usr/local/bin/kubectl get pvc -n kubesphere-system openldap-pvc-openldap-0 -o jsonpath=‘{.status.capacity.storage}’\n”, “delta”: “0:00:00.529545”, “end”: “2020-04-23 03:30:12.921917”, “msg”: “non-zero return code”, “rc”: 1, “start”: “2020-04-23 03:30:12.392372″, “stderr”: "Error from server (NotFound): persistentvolumeclaims \“openldap-pvc-openldap-0\” not found", “stderr_lines”: ["Error from server (NotFound): persistentvolumeclaims \“openldap-pvc-openldap-0\” not found"], “stdout”: "", “stdout_lines”: []}
…ignoring
TASK [common : Kubesphere | Setting openldap pv size] **************************
skipping: [localhost]
TASK [common : Kubesphere | Check etcd db PersistentVolumeClaim] ***************
fatal: [localhost]: FAILED! => {“changed”: true, “cmd”: “/usr/local/bin/kubectl get pvc -n kubesphere-system etcd-pvc -o jsonpath=‘{.status.capacity.storage}’\n”, “delta”: “0:00:00.517999”, “end”: “2020-04-23 03:30:13.570670″, “msg”: “non-zero return code”, “rc”: 1, “start”: “2020-04-23 03:30:13.052671″, “stderr”: "Error from server (NotFound): persistentvolumeclaims \“etcd-pvc\” not found", “stderr_lines”: ["Error from server (NotFound): persistentvolumeclaims \“etcd-pvc\” not found"], “stdout”: "", “stdout_lines”: []}
…ignoring
TASK [common : Kubesphere | Setting etcd pv size] ******************************
skipping: [localhost]
TASK [common : Kubesphere | Check redis ha PersistentVolumeClaim] **************
fatal: [localhost]: FAILED! => {“changed”: true, “cmd”: “/usr/local/bin/kubectl get pvc -n kubesphere-system data-redis-ha-server-0 -o jsonpath=‘{.status.capacity.storage}’\n”, “delta”: “0:00:00.516003″, “end”: “2020-04-23 03:30:14.290529″, “msg”: “non-zero return code”, “rc”: 1, “start”: “2020-04-23 03:30:13.774526″, “stderr”: "Error from server (NotFound): persistentvolumeclaims \“data-redis-ha-server-0\” not found", “stderr_lines”: ["Error from server (NotFound): persistentvolumeclaims \“data-redis-ha-server-0\” not found"], “stdout”: "", “stdout_lines”: []}
…ignoring
TASK [common : Kubesphere | Setting redis ha pv size] **************************
skipping: [localhost]
TASK [common : Kubesphere | Creating common component manifests] ***************
changed: [localhost] => (item={u’path’: u’etcd’, u’file’: u’etcd.yaml’})
changed: [localhost] => (item={u’name’: u’mysql’, u’file’: u’mysql.yaml’})
changed: [localhost] => (item={u’path’: u’redis’, u’file’: u’redis.yaml’})
TASK [common : Kubesphere | Creating mysql sercet] *****************************
changed: [localhost]
TASK [common : Kubesphere | Deploying etcd and mysql] **************************
skipping: [localhost] => (item=etcd.yaml)
skipping: [localhost] => (item=mysql.yaml)
TASK [common : Kubesphere | Getting minio installation files] ******************
skipping: [localhost] => (item=minio-ha)
TASK [common : Kubesphere | Creating manifests] ********************************
skipping: [localhost] => (item={u’name’: u’custom-values-minio’, u’file’: u’custom-values-minio.yaml’})
TASK [common : Kubesphere | Check minio] ***************************************
skipping: [localhost]
TASK [common : Kubesphere | Deploy minio] **************************************
skipping: [localhost]
TASK [common : debug] **********************************************************
skipping: [localhost]
TASK [common : fail] ***********************************************************
skipping: [localhost]
TASK [common : Kubesphere | create minio config directory] *********************
skipping: [localhost]
TASK [common : Kubesphere | Creating common component manifests] ***************
skipping: [localhost] => (item={u’path’: u’/root/.config/rclone’, u’file’: u’rclone.conf’})
TASK [common : include_tasks] **************************************************
skipping: [localhost] => (item=helm)
skipping: [localhost] => (item=vmbased)
TASK [common : Kubesphere | Check ha-redis] ************************************
skipping: [localhost]
TASK [common : Kubesphere | Getting redis installation files] ******************
skipping: [localhost] => (item=redis-ha)
TASK [common : Kubesphere | Creating manifests] ********************************
skipping: [localhost] => (item={u’name’: u’custom-values-redis’, u’file’: u’custom-values-redis.yaml’})
TASK [common : Kubesphere | Check old redis status] ****************************
skipping: [localhost]
TASK [common : Kubesphere | Delete and backup old redis svc] *******************
skipping: [localhost]
TASK [common : Kubesphere | Deploying redis] ***********************************
skipping: [localhost]
TASK [common : Kubesphere | Getting redis PodIp] *******************************
skipping: [localhost]
TASK [common : Kubesphere | Creating redis migration script] *******************
skipping: [localhost] => (item={u’path’: u’/etc/kubesphere’, u’file’: u’redisMigrate.py’})
TASK [common : Kubesphere | Check redis-ha status] *****************************
skipping: [localhost]
TASK [common : ks-logging | Migrating redis data] ******************************
skipping: [localhost]
TASK [common : Kubesphere | Disable old redis] *********************************
skipping: [localhost]
TASK [common : Kubesphere | Deploying redis] ***********************************
skipping: [localhost] => (item=redis.yaml)
TASK [common : Kubesphere | Getting openldap installation files] ***************
skipping: [localhost] => (item=openldap-ha)
TASK [common : Kubesphere | Creating manifests] ********************************
skipping: [localhost] => (item={u’name’: u’custom-values-openldap’, u’file’: u’custom-values-openldap.yaml’})
TASK [common : Kubesphere | Check old openldap status] *************************
skipping: [localhost]
TASK [common : KubeSphere | Shutdown ks-account] *******************************
skipping: [localhost]
TASK [common : Kubesphere | Delete and backup old openldap svc] ****************
skipping: [localhost]
TASK [common : Kubesphere | Check openldap] ************************************
skipping: [localhost]
TASK [common : Kubesphere | Deploy openldap] ***********************************
skipping: [localhost]
TASK [common : Kubesphere | Load old openldap data] ****************************
skipping: [localhost]
TASK [common : Kubesphere | Check openldap-ha status] **************************
skipping: [localhost]
TASK [common : Kubesphere | Get openldap-ha pod list] **************************
skipping: [localhost]
TASK [common : Kubesphere | Get old openldap data] *****************************
skipping: [localhost]
TASK [common : Kubesphere | Migrating openldap data] ***************************
skipping: [localhost]
TASK [common : Kubesphere | Disable old openldap] ******************************
skipping: [localhost]
TASK [common : Kubesphere | Restart openldap] **********************************
skipping: [localhost]
TASK [common : KubeSphere | Restarting ks-account] *****************************
skipping: [localhost]
TASK [common : Kubesphere | Check ha-redis] ************************************
changed: [localhost]
TASK [common : Kubesphere | Getting redis installation files] ******************
skipping: [localhost] => (item=redis-ha)
TASK [common : Kubesphere | Creating manifests] ********************************
skipping: [localhost] => (item={u’name’: u’custom-values-redis’, u’file’: u’custom-values-redis.yaml’})
TASK [common : Kubesphere | Check old redis status] ****************************
skipping: [localhost]
TASK [common : Kubesphere | Delete and backup old redis svc] *******************
skipping: [localhost]
TASK [common : Kubesphere | Deploying redis] ***********************************
skipping: [localhost]
TASK [common : Kubesphere | Getting redis PodIp] *******************************
skipping: [localhost]
TASK [common : Kubesphere | Creating redis migration script] *******************
skipping: [localhost] => (item={u’path’: u’/etc/kubesphere’, u’file’: u’redisMigrate.py’})
TASK [common : Kubesphere | Check redis-ha status] *****************************
skipping: [localhost]
TASK [common : ks-logging | Migrating redis data] ******************************
skipping: [localhost]
TASK [common : Kubesphere | Disable old redis] *********************************
skipping: [localhost]
TASK [common : Kubesphere | Deploying redis] ***********************************
changed: [localhost] => (item=redis.yaml)
TASK [common : Kubesphere | Getting openldap installation files] ***************
changed: [localhost] => (item=openldap-ha)
TASK [common : Kubesphere | Creating manifests] ********************************
changed: [localhost] => (item={u’name’: u’custom-values-openldap’, u’file’: u’custom-values-openldap.yaml’})
TASK [common : Kubesphere | Check old openldap status] *************************
changed: [localhost]
TASK [common : KubeSphere | Shutdown ks-account] *******************************
skipping: [localhost]
TASK [common : Kubesphere | Delete and backup old openldap svc] ****************
skipping: [localhost]
TASK [common : Kubesphere | Check openldap] ************************************
changed: [localhost]
TASK [common : Kubesphere | Deploy openldap] ***********************************
changed: [localhost]
TASK [common : Kubesphere | Load old openldap data] ****************************
skipping: [localhost]
TASK [common : Kubesphere | Check openldap-ha status] **************************
skipping: [localhost]
TASK [common : Kubesphere | Get openldap-ha pod list] **************************
skipping: [localhost]
TASK [common : Kubesphere | Get old openldap data] *****************************
skipping: [localhost]
TASK [common : Kubesphere | Migrating openldap data] ***************************
skipping: [localhost]
TASK [common : Kubesphere | Disable old openldap] ******************************
skipping: [localhost]
TASK [common : Kubesphere | Restart openldap] **********************************
skipping: [localhost]
TASK [common : KubeSphere | Restarting ks-account] *****************************
skipping: [localhost]
TASK [common : Kubesphere | Getting minio installation files] ******************
changed: [localhost] => (item=minio-ha)
TASK [common : Kubesphere | Creating manifests] ********************************
changed: [localhost] => (item={u’name’: u’custom-values-minio’, u’file’: u’custom-values-minio.yaml’})
TASK [common : Kubesphere | Check minio] ***************************************
changed: [localhost]
TASK [common : Kubesphere | Deploy minio] **************************************
`
CentOS 7.5 最小化安装后， 再AllInOne安装， 遇到的错误
`2020-04-23 21:23:09,749 p=24810 u=root | Thursday 23 April 2020 21:23:09 +0800 (0:00:00.228) 0:00:16.730 ********
2020-04-23 21:23:09,787 p=24810 u=root | skipping: [ks-allinone]
2020-04-23 21:23:09,861 p=24810 u=root | TASK [Create repo.d] ******************************************************************************
2020-04-23 21:23:09,861 p=24810 u=root | Thursday 23 April 2020 21:23:09 +0800 (0:00:00.111) 0:00:16.842 ********
2020-04-23 21:23:09,977 p=24810 u=root | fatal: [ks-allinone]: FAILED! => {
“changed”: true,
“rc”: 1
}
STDERR:
mkdir: 无法创建目录"/etc/yum.repos.d": 文件已存在
MSG:
non-zero return code
2020-04-23 21:23:09,978 p=24810 u=root | …ignoring
2020-04-23 21:23:10,096 p=24810 u=root | TASK [Creat client.repo] **************************************************************************
`
这个是因为与我自己装了yum冲突导致的吗？怎么解决呢？
最后还看到这样的error:
`2020-04-23 22:21:53,336 p=4091 u=root | fatal: [ks-allinone -> ks-allinone]: FAILED! => {
“attempts”: 4,
“changed”: false,
“dest”: “/root/releases/kubeadm-v1.16.7-amd64”,
“state”: “absent”,
“url”: “http://192.168.31.141:5080/k8s_repo/iso/v1.16.7/kubeadm”
}
MSG:
Request failed: <urlopen error [Errno 111] 拒绝连接>
2020-04-23 22:21:53,338 p=4091 u=root | NO MORE HOSTS LEFT ********************************************************************************
2020-04-23 22:21:53,339 p=4091 u=root | PLAY RECAP ****************************************************************************************
2020-04-23 22:21:53,340 p=4091 u=root | ks-allinone : ok=122 changed=26 unreachable=0 failed=1
2020-04-23 22:21:53,340 p=4091 u=root | localhost : ok=1 changed=0 unreachable=0 failed=0
2020-04-23 22:21:53,341 p=4091 u=root | Thursday 23 April 2020 22:21:53 +0800 (0:00:23.580) 0:03:27.193 ********
2020-04-23 22:21:53,341 p=4091 u=root | ===============================================================================
2020-04-23 22:21:53,344 p=4091 u=root | download : download_file | Download item ————————————————– 23.58s
`
我太难了，在线、离线都安装，都装不上，装了卸，卸了装。防火墙也关了
TASK [kubernetes/preinstall : Install packages requirements] ***********************************************************************************************************************************************************
Sunday 26 April 2020 20:17:45 +0800 (0:00:00.161) 0:00:40.420 **********
FAILED - RETRYING: Install packages requirements (4 retries left).
ok: [master]
FAILED - RETRYING: Install packages requirements (4 retries left).
FAILED - RETRYING: Install packages requirements (3 retries left).
FAILED - RETRYING: Install packages requirements (3 retries left).
FAILED - RETRYING: Install packages requirements (2 retries left).
FAILED - RETRYING: Install packages requirements (2 retries left).
FAILED - RETRYING: Install packages requirements (1 retries left).
FAILED - RETRYING: Install packages requirements (1 retries left).
fatal: [node2]: FAILED! => {
“attempts”: 4,
“changed”: false,
“rc”: 1,
“results”: []
}
MSG:
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
One of the configured repositories failed (centos7),
and yum doesn’t have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work “fix” this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=bash ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable bash
or
subscription-manager repos --disable=bash
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=bash.skip_if_unavailable=truefailure: repodata/repomd.xml from bash: [Errno 256] No more mirrors to try.
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
fatal: [node1]: FAILED! => {
“attempts”: 4,
“changed”: false,
“rc”: 1,
“results”: []
}
MSG:
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
正在尝试其它镜像。
One of the configured repositories failed (centos7),
and yum doesn’t have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work “fix” this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=bash ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable bash
or
subscription-manager repos --disable=bash
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=bash.skip_if_unavailable=truefailure: repodata/repomd.xml from bash: [Errno 256] No more mirrors to try.
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
http://192.168.4.99:5080/yum_repo/iso/repodata/repomd.xml: [Errno 14] curl#7 - “Failed connect to 192.168.4.99:5080; 拒绝连接”
NO MORE HOSTS LEFT ***************************************